PDLC adhesive film
Retrofit onto existing glass
₹1,400 – ₹2,400 / sq ft
- Applied to your existing panes
- Cut to size on site
- Fastest route — often same day
- Best for occupied spaces
Pricing
Most suppliers hide behind "request a quote." We publish our rate bands, what sits inside them, and what costs extra — so you can budget a project before you ever pick up the phone.
Indicative rate bands. Final pricing depends on panel size, glass build-up, control system and site conditions. Every project is confirmed with a written, itemised quotation after survey — no hidden extras.
Retrofit onto existing glass
₹1,400 – ₹2,400 / sq ft
New build & permanent installs
₹2,400 – ₹4,200 / sq ft
Shapes, curves & large spans
₹4,000 – ₹7,500 / sq ft
No surprises
Controls & installation
| Item | Indicative cost | Notes |
|---|---|---|
| Wall switch controller | ₹3,500 – ₹6,000 | Standard on/off, per circuit |
| RF remote controller | ₹6,000 – ₹9,000 | Handheld, multi-zone |
| Wi-Fi / app module | ₹9,000 – ₹14,000 | Alexa & Google compatible |
| Transformer / driver | ₹4,500 – ₹8,000 | Rated to approx. 5 m² per unit |
| Dimmer module | ₹7,000 – ₹11,000 | Variable opacity control |
| Professional installation | ₹150 – ₹350 / sq ft | By access and site complexity |
| Annual maintenance (AMC) | 4% – 6% of order value | Optional, from year two |
Worked examples
Fully loaded budgets — glass, controls and installation together.
120 sq ft · laminated smart glass · RF remote
Total₹3.1L – ₹5.6L
60 sq ft · adhesive film · wall switch
Total₹0.97L – ₹1.7L
35 sq ft · laminated smart glass · wall switch
Total₹0.93L – ₹1.65L
What moves the number
Very large single spans need thicker glass and heavier handling, pushing the rate up. Standard sizes are the most economical.
Volume matters. Orders above 500 sq ft attract trade rates; above 2,000 sq ft we price as a project, not per panel.
Thickness, toughening, low-iron or double-glazed units all shift the base cost of the laminated unit.
A single wall switch is the cheapest route. Multi-zone, dimmable or BMS-integrated controls add cost per circuit.
Height, access, working hours and whether the space is occupied all affect the installation line, not the glass.
Delivery within our four branch cities is included. Outside them, freight and crew travel are quoted transparently.
For the trade
If you specify or install at volume, you shouldn't be paying retail. Register once and we'll set you up on trade terms with the documentation your drawings need.
Pricing questions
The film and glass are both manufactured and cut by area, so area is the honest unit. Note that most suppliers apply a minimum billable area per panel — ours is 10 sq ft, and we state it upfront rather than burying it in the quote.
Film costs less per square foot and avoids replacing your existing glass, so it is usually the lower total cost for a retrofit. Laminated glass costs more upfront but lasts 20+ years against 10–15 for film, so over a full building life cycle it often works out cheaper.
Very little. PDLC draws roughly 5 watts per square metre while clear, and nothing at all when opaque. Ten square metres of switchable glass uses less power than a single LED bulb.
No. Survey, measurement and a written itemised quotation are free, with no obligation. We would rather you compared us properly.
Usually thinner, less uniform ITO conductive coating and adhesives without UV inhibitors. Budget film can yellow, haze or fail at the edges within three to five years. We are happy to show you the spec sheet behind our rate so you can compare like for like.
Yes. Send an approximate area and space type and we will give you a concept-stage budget band the same day — useful for early cost plans.
Request a quote
Send us the area and space type. You will have a written, line-by-line quotation within one business day — including controls and installation, not just the glass.